> I have tried starting the "Run UUT" from address $1000 and $5000 as I
> believe this to be the address for each ROM but still nothing.
I have a gaelco world rally PCB that will not 'run UUT' either.
I can read / checksum ROM ok, test RAM - all works as expected. I can
even copy a program into RAM and run uut at that address and it works,
but it will not run the code from ROM. The PCB works fine with a 68000
in the slot (even using the one from within the fluke pod!)
Other gaelco PCB's work fine, another copy of the same game works fine
with run UUT
so, no idea why, but it does seem to happen.
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Received on Mon Oct 6 13:19:38 2008
This archive was generated by hypermail 2.1.8 : Tue Oct 07 2008 - 13:50:01 EDT