Re: 9100A software

Is there software on this 9100 that you have written and want to keep?

If so, just copy the relevant UUT's you want to keep and maybe the PROGLIB
directories onto floppies and then install the new system software as per
whats on my page :
http://www.andysarcade.net/personal/tech/fluke9100/index.htm
after you're done, just copy them back to the hdr from the floppy.

And yup, the old miniscribe drives with the exposed rotor arm can sometimes
just be rotated to get them going again as they 'stick' in the stepper motor
for some reason..

I've never had any serialised software problems, i think this is because
with system software above version 5.0 they did away with serialisation
altogether it seems? Make sure your main board eproms are also changed as
this might also have something to do with the serialisation.

--
Andrew Welburn
http://www.andys-arcade.com
----- Original Message ----- 
From: "John Robertson" <jrr@flippers.com>
To: "Technical Tools Mail List" <techtoolslist@flippers.com>
Sent: Saturday, April 16, 2011 2:29 AM
Subject: Re: [Techtoolslist] 9100A software
> John Robertson wrote:
>> Does anyone have non-serialized software for the 9100A...I've lost track 
>> of that project from years ago, and want to try out a SCSI to Flash 
>> adapter, but the unit I just bought has a hard drive failure...
>>
>> John :-#)#
>>
> Actually it turns out to be a 'shake & bake' hard drive. giving the drive 
> a twist on powerup gets it turning, and it is loaded with system 5.0.
>
> Now to figure out how to extract the disk image (MFM to SCSI 
> interface)...a birt rusty as the last time I looked at this was almost ten 
> years ago...
>
> Or I could read the archives a bit more...
>
> John :-#)#
>
> -- 
> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call 
> (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
>                 www.flippers.com "Old pinballers never die, they just flip 
> out"
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ 
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/