I was thinking this as i was reading the OP too :)
-- Andrew Welburn http://www.andys-arcade.com ----- Original Message ----- From: "David Shoemaker" <davids@oz.net> To: <jrr@flippers.com>; "Technical Tools Mail List" <techtoolslist@flippers.com> Sent: Friday, October 14, 2011 2:28 AM Subject: Re: [Techtoolslist] Reading 9100 floppies... > Not sure what I am missing but why don't you use the tool to make a disk > from the image and see if it reads in the 9100? > > I would also then archive the copied disk and diff the two image files. > If all went right they should match. > _______________________________________________ > Techtoolslist mailing list > Techtoolslist@flippers.com > http://seven.pairlist.net/mailman/listinfo/techtoolslist > FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/Received on Wed Oct 19 17:24:53 2011
This archive was generated by hypermail 2.1.8 : Wed Oct 19 2011 - 18:50:01 EDT