Not a definitive answer as I'm not 100% sure I've tried it, but as you say the 010 is pin compatible and slightly faster in some instructions and was a semi-popular (but pointless) DIY upgrade for the Amiga. I'd give it a go as I suspect it'll work. I certainly can't see it doing harm.
Not checked the clk offerings for the 010s though so if things get warm... ;)
tim
Sent from my iPad
On 21 Dec 2011, at 18:51, "Colin Davies" <colin.w.davies@btopenworld.com> wrote:
> Here is one for you guys to ponder over.....
>
> Can you use a Fluke Pod with 68000 CPU, to check out Atari System 1's , Gauntlet etc that use a 68010 CPU ?
>
> Can you use the 68000 CPU in the pod , or do you have to fit a 68010 ? - or is it just not doable at all ?
>
> I'm not looking to do UUT's , but more just ram / rom testing , general prodding about etc..... Supposed to be Pin Compatable.
>
> Thanks,
> Colin
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Wed Dec 21 14:32:10 2011
This archive was generated by hypermail 2.1.8 : Wed Dec 21 2011 - 15:50:00 EST