Re: Kurz Kasch PDFs updated on Flippers

John Robertson wrote:
> Ideally one would make a universal card - like the VERO boards but
> with the 0.1" (?) 100 pin connector and the rest of the board full of
> plated through holes...
>
> http://www.verotl.com/prototyping-products
>
> Then if folks scan their cards on both sides (or photo) someone can
> draw up the wiring.
>
> As I seem to have the largest single collection I'll be
> scanning/photographing them this spring with my work experience
> students. I'll leave it to someone else to do the wiring though, I
> have way too many projects to finish that are needed to pay bills. I
> will post the pictures on flippers though as they are done.
>
> I have replacement 100 pin wire wrap sockets for the test fixture for
> sale if anyone needs one.
>
> I also recommend that you fuse the transformer secondaries to avoid
> burning cards or edge connectors if a problem occurs (don't ask).
>
> John :-#)#

Oh, and considering that the last six pins on the two Program connectors
(A & B) aren't used I've hooked four of them (49a(top) & 49a(bottom),
50a(top) & 50a(bottom)) up to two added internal speakers (old PC tiny
ones) to simplify testing.

As for prototype cards, I'd take a bunch (10 to 20) for making up
missing cards...

John :-#)#

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Thu Mar 1 12:29:56 2012