Re: Pod cable for 6809?

David Shoemaker wrote:
> Anyone have a spare good cable or know of a source? Mine is flaky and I
> need to replace it.
>
>
>
> Thanks,
>
> David
>
> ________
Usually the problem is right at the the 40 pin IC header and you can
easily crimp on a new one if you don't have the twisted ribbon wire. You
can even order them from Digi-Key with the 40 pin plug end terminating
in the 40 pin IC socket.

The advantage with the twisted is you can run a cable of about a foot.
With flat ribbon 8 inches is pretty safe.

I always plug a 40 pin IC socket (with flat solder tails) onto the UUT
end to act as sacrifice pins. Easier to replace that one!

John :-#)#

-- 
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                 www.flippers.com 
"Old pinballers never die, they just flip out"
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/