Re: Dummy load on power supply

Yep a 15A unit. Thanks that was what I thought but it was gut not knowledge
:)

-----Original Message-----
From: techtoolslist-bounces@flippers.com
[mailto:techtoolslist-bounces@flippers.com] On Behalf Of Brad Gass
Sent: Thursday, August 02, 2012 8:44 PM
To: Technical Tools Mail List
Subject: Re: [Techtoolslist] Dummy load on power supply

In the non-arcade SMPS part of my world, as a general rule 5% of rated
output is usually more than sufficient to stabilize cross-regulation -
sometimes it's a lot less actually. However, I can't speak directly to the
cross-regulation performance of the Peter Chou supplies as I've never loaded
them in that manner. But if it's one of the 15A units, I think 1A should be
more than enough.

----- Original Message -----
From: "David Shoemaker" <davids@oz.net>
To: "Techtoolslist@Flippers. Com" <techtoolslist@flippers.com>
Sent: Thursday, August 2, 2012 9:56:02 PM
Subject: [Techtoolslist] Dummy load on power supply

I am testing a board that takes 12v in. I am using a Peter Chau supply on
my bench. As the voltages follow 5v on those I need to load the supply
somewhat to stabilize Is 1A enough?

Thanks,
David
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Fri Aug 3 00:32:24 2012