Re: message

CRC wrote:
> On 4 Oct 2012, at 6:05 PM, adolfo bustos wrote:
>
>> in a message to techtoolslist-request@flippers.com:
>> techtoolslist@flippers.com
>> Prom Burner B&C Microsystems, Model 1409C
>> Anyone know the Program "" Burner.exe ""
>> compatible IBM .-
>> for
>> Universal E(e)prom Programmer
>> B&C Microsystems
>> 1409C Programmer
>> Model 1409C ver 10.2CT
>> Any info would be greatly appreciated.
>> Thanks,
>> Adolfo
>> _______________________________________________
>> Techtoolslist mailing list
>> Techtoolslist@flippers.com
>> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>> FTP site is: ftp://ttl.arcadetech.org
>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>>
>
>
> Adolfo -
>
> I begged a copy of an older version of their "burner" program a while ago. It supports the 1400 and 1400/87. There is a slightly newer version, but it wouldn't work with my 1200.
>
> I put the program at: <https://www.dropbox.com/sh/ztgxu9w53n08aba/j2nxmKCAWD>.
>
> You might drop support at BP a note asking for a later version that supports your programmer.
>
> Beware, I found that this program will not run on a current PC - I had to dig up a 500 MHz ancient box to run the programmer.
>
> I hope this helps ->CRC
> _______________________________________________
>
If you can zip that up I'll add it to the archives...

John :-#)#

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Fri Oct 5 12:16:23 2012