Re: Fluke 9100A V6.1

OK folks, I now can CONFIRM that 6.1 is NOT serialized!

I removed the top case from my newest 1990 9100A (ex. Barry) which has
6.1 installed on its hard drive, and dropped it onto an earlier version
9100A (which had 4MB of RAM), and it booted up just fine!

So - looks like we need the four discs from System 6.1 - the three
install disks and the Editor disc. I understand that the collection on
the FTP site is defective.

I'll check around and see what I can find, if Andre has a good set then
if he can back them up and send to me I shall upload them to TTL.

Alternatively I'll see if I can read the SCSI drive to a PC and upload
that image.

John :-#)#

Andre Huijts wrote:
>
> Verstuurd vanaf mijn iPad
> ------------------------------------------------------------------------
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Tue Nov 6 21:18:12 2012