Re: Fluke 9100A POD error codes

Yup, been downloading files....

I just exchanged back the original 6532 and still get the same error code 0.

First I got the 2100 code, so I hooked up the flatcable connector again to the self-test ZIF, next I got a 1 adress line error, moved it a bit again and closed it again and then got error code 0.

I find it weird that the 9100A does not return any name of the found pod since the 9010 does seem to do that. It kinda leaves you "in the blank" in that regards.

Anyway, the 6532 was obviously not the (a) problem....

Let's try the 6502 pod next...

Op 15 nov. 2012, om 23:23 heeft John Robertson <jrr@flippers.com> het volgende geschreven:

> Andre Huijts wrote:
>> Sorry guys, should have known to trust google:
>>
>> http://webcache.googleusercontent.com/search?q=cache:DxxC__mqePcJ:arcarc.xmission.com/Test%2520Equipment/Fluke/9100%2520Fixture/9100%2520Supplemental%2520Pod%2520Info.pdf+fluke+9100a+error+code+2001&cd=1&hl=nl&ct=clnk&gl=nl
>>
>>
>> This is just SO great about Google: it can find this info in a PDF doc that is not searchable.
>>
>>
>> I googled this: fluke 9100a error code 2001
>>
>> Then it found the 9100 Supplemental Pod Info.pdf at ArcArc. If you simply click on the PDF link it will open it, but you can't search it.
>> Now, if you click "HTML version" it will open a version that is converted to HTML and is thus searchable. It immediatly showed 3 hits....just great ! :)
>>
>> So...now I know what this code is.... If it's true I am close to having a working Z80 pod :)
>>
>>
>>
>> Op 15 nov. 2012, om 22:44 heeft Andre Huijts <a.huijts@upcmail.nl> het volgende geschreven:
>>
>>
>>> I just put the 6532 of a 6800 pod (which self-tested OK) into my totally non working Z80 pod.
>>>
>>> There is some progress, since now I get an error code 2001. Yes, I checked the Z80 pod manual but the listed error codes there are only for the 9010 since they are only two digit.
>>>
>>> Now, I'm taking a wild guess and thinking "20" means a pod problem and "01" is probably the error as listed in the pod manual....
>>>
>>> Is that correct ?
>>>
>>> André Huijts
>>> andre.huijts@upcmail.nl
>>>
>>>
>>>
>>>
>>>
> Hi Andre,
>
> That pod supplemental file was located in the /Fluke/PDFs/9100_Fixture directory.
>
> I'm going to move it to the PODs directory, it is misfiled (opps).
>
> You may want to rummage around the FTP site some more...it is the source for many sites that have Fluke manuals that are for the 9010 and 9100 series test equipment. I am tidying it up these days to make it easier to find files and have the files more clearly labelled.
>
> If you can't find something and find it elsewhere (or a better - say searchable) please upload it to the /incoming directory!
>
> Thanks!
>
> John :-#)#
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

André Huijts
andre.huijts@upcmail.nl

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Thu Nov 15 17:36:53 2012