It does make sense, doesn't it....it would be extremely weird to put +5V on that pin.....
Actually....looking at the schematics again it looks like the monochrome monitor is actually FEEDING BACK the +5V judging by the "arrow" going "into" the connector...
However, I have a problem now.....I need +5V for the 74LS04....and I don't want to make this a messy job....so I think I'll switch to this:
http://www.mikesarcade.com/wiretap/info/SyncInv.pdf
Guess I'll have to order a 74C04....
Op 16 nov. 2012, om 23:38 heeft David Shoemaker <davids@oz.net> het volgende geschreven:
> I have used a normal cga monitor on mine before. I don't remember doing anything special to use it.
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
André Huijts
andre.huijts@upcmail.nl
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Fri Nov 16 18:03:23 2012
This archive was generated by hypermail 2.1.8 : Fri Nov 16 2012 - 18:50:01 EST