Re: 6502 pod error code

Address Bus 12... A12 line connected to the CPU, simple. You may find a bad bus buffer if you're lucky, or one of the customs linked to it will be duff..

Andrew Welburn (mobile)
www.andys-arcade.com

On 18 Nov 2012, at 14:13, Andre Huijts <a.huijts@upcmail.nl> wrote:

> OK....
>
> Something I noticed when checking once again my 6502 pod is that the interconnecting pins between the two boards seemed very loose on one side (the more near the lowest part of the pod).
>
> I tried to connect them as tight as possible but the spacer near where the ground connection of the flat-cable is placed prevents it to fit really tight. I have a feeling there is still not a good/reliable connection between the boards this way.
>
> When I connect it now and run the self-test I get this error:
>
> Add line AB12 pin 22 not drivable
>
> Neither the original pod manual nor the additional Pod info for the 9100 indicate this error code and what it means. It is clear enough I guess but what do they mean with AB12 ?
>
>
> André Huijts
> andre.huijts@upcmail.nl
>
>
>
>
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Sun Nov 18 16:21:19 2012