On 27/11/2012 03:08, John Robertson wrote:
> David Shoemaker wrote:
>> Do I need the service disk to format my machine to use 6.1?
>
> Unfortunately the answer is Yes - you need a unserialized Service Disc
> for 6.0 or 6.1 to format your drive or CFC card.
I used the 1.4 service disk to install 6.0 on my fluke... as noted on my
webpage :
http://www.andysarcade.net/personal/tech/fluke9100/index.htm
so i guess the 1.4 service disk is 'unserialised'. I keep hearing
mention of serialisation, but to this point have not come up against
problems with it at all.
[snip]
> I'm not having any luck yet with using a CF and my SCSI to IDE adapter -
> which works fine with hard drives, but can't handle the CF for some
> reason...
Which SCSI adapter are you using? for future reference...
I've just bought an Aztec Monster CF adapter and i'm hoping it'll go
smoothly. I have a 9105 arrived (but damaged in the post :( ) that i
need to strip and use to fix two other 9100's, hopefully this week!
Andrew Welburn
http://www.andys-arcade.com
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Tue Nov 27 04:29:58 2012
This archive was generated by hypermail 2.1.8 : Wed Nov 28 2012 - 15:50:01 EST