Re: Samdisk looks very promising...

Colin Davies wrote:
> Is it possible to clone the Serial Number so all 9100's look the
> same/have same serial ? - It must be stored somewhere ?
>
That is what I am hoping to do. There is a NVRAM (8-pin X2444) device
on the motherboard that holds (I suspect) the serial number.

However only one of my other 9100s are working, so have to service these
to see if the serial number is tucked away there...

I did this way back in 2002 (find two of them here
/Fluke/9100A/9100Base/9100 EEPROM copies.zip) but got busy with other
projects and never finished the job...

10 years isn't too bad, is it?

John :-#)#
> ----- Original Message ----- From: "John Robertson" <jrr@flippers.com>
> To: <techtoolslist@flippers.com>
> Sent: Wednesday, November 28, 2012 8:24 PM
> Subject: [!! SPAM] Re: [Techtoolslist] Samdisk looks very promising...
>
>
>> Andrew Welburn wrote:
>>>
>>> On 27/11/2012 03:08, John Robertson wrote:
>>>> David Shoemaker wrote:
>>>>> Do I need the service disk to format my machine to use 6.1?
>>>>
>>>> Unfortunately the answer is Yes - you need a unserialized Service Disc
>>>> for 6.0 or 6.1 to format your drive or CFC card.
>>>
>>> I used the 1.4 service disk to install 6.0 on my fluke... as noted
>>> on my webpage :
>>> http://www.andysarcade.net/personal/tech/fluke9100/index.htm
>>>
>>> so i guess the 1.4 service disk is 'unserialised'. I keep hearing
>>> mention of serialisation, but to this point have not come up against
>>> problems with it at all.
>>
>> What is interesting about the 1.4 service disk vs. the serialized 6.0
>> service disk is the 6.0 has a much more extensive directory (from the
>> image file). Unfortunately the serialization of that drive is the
>> problem...and ahving five 9100s I've forgotten WHICH machine the disc
>> was serialized for! Am going to figure that out shortly and then play
>> with the serial numbers or hand the project off to someone who is
>> more familiar with monkeying with this sort of thing.
>>
>> Where is Corey Stupp these days anyway!
>>
>> John :-#)#
>>> ...
>>>
>>> Andrew Welburn
>>> http://www.andys-arcade.com
>>>
>>>
>>
>>
>> _______________________________________________
>> Techtoolslist mailing list
>> Techtoolslist@flippers.com
>> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>> FTP site is: ftp://ttl.arcadetech.org
>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
>
>

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Wed Nov 28 16:42:42 2012