Me too, and I totally doubt they actually have the part, probably they just have some database full of listed parts from years and years...
Op 5 feb. 2013, om 01:10 heeft Rodger Boots <rlboots2@gmail.com> het volgende geschreven:
> Replace it. If you Google "Fluke 585992" it shows up as available at
> Lintech Components, but they make you request a quote to get the price.
> God I hate that!
> Yeah I'd seen those pictures. I really lack time to repro those, would be
> nice though.
>
> Still got all datalines stuck high when testing the bad Z80 pod, might have
> found something, U10 is getting really hot (see my other mail, sorry)
>
>
>
> Op 4 feb. 2013, om 07:20 heeft John Robertson <jrr@flippers.com> het
> volgende geschreven:
>
>> Andre Huijts wrote:
>>> Not exactly sure what I'm doing wrong when posting ?
>>>
>>> Anyway, I just read the EPROM with my Needham and compared it in the
> editor with the file on the FTP site ant they are identical so I'm sure the
> ROM is OK.
>>>
>>> Am I really the first to test a pod with another pod ? Someone must have
> done it before me ? Something else that struck me: Fluke must have had
> their own 9100 programs for their own POD series (amongst others) I presume
> ? I mean, it would be pretty weird if they didn't use their own
> tool...........
>>> Anyway I think I got it to work by powering up both the 9010 (with bad
> pod connected) and the 9100 (with the good pod). After power up I connected
> the ribbon cable of the good pod to the bad pod....
>>>
>>> I know this is against normal UUT testing procedure.
>>>
>>> Did do bus testing, RAM testing and get all (or at least most) Datalines
> as stuck high. Working from there....or are these false readings because of
> wrong hook-up ?
>>>
>>>
>>
>> Hi Andre (and all),
>>
>> Fluke had a set of POD test fixtures that allowed one to service the pods
> to make sure they were up to spec. These included tapes for the testing
> process. I happen to have a set up these - for tapes see the ftp site under
> /Fluke/9010a Tapes: Pod_Test (6502/6800/8080/8085/Z80 & 6802). Pictures of
> the test fixtures are named "9000pod.jpg". I haven't looked at these since
> 2002, as I haven't had any pods needing service (not going to lend them
> either) but I can take better pictures if anyone wants to duplicate them.
>>
>> John :-#)#
>>>
>>> Op 2 feb. 2013, om 21:16 heeft Martin White <martin@guddler.co.uk> het
> volgende geschreven:
>>>
>>>
>>>> Actually, please DO top post! Its far, far easier to read on s mobile
> phone that way :)
>>>>
>>>> -----Original Message-----
>>>> From: John Robertson
>>>> Sent: 02/02/2013 18:13
>>>> To: Technical Tools Mail List
>>>> Subject: Re: [Techtoolslist] Troubleshooting a defective pod
>>>>
>>>> Andre Huijts wrote:
>>>>
>>>>> One more thing:
>>>>>
>>>>> The manual says to do a ROM test and it gives the addresses in the
> table but it fails to give the correct signature ?
>>>>>
>>>>> Anyone knows it for the Z80 pod ROM V1.1 ?
>>>>>
>>>>>
>>>>>
>>>>>
>>>> Don't Top Post please!
>>>>
>>>> Take the ROM image and pass it through the Signature Generator in the
> FIDE generator you can download here:
>>>>
>>>> http://tech.quarterarcade.com/tech/Fluke/9010A/FIDE.aspx
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Techtoolslist mailing list
>>> Techtoolslist@flippers.com
>>> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>>> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>>>
>>>
>>>
>>
>>
>> --
>> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call
> (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
>> www.flippers.com "Old pinballers never die, they just flip
> out"
>>
>> _______________________________________________
>> Techtoolslist mailing list
>> Techtoolslist@flippers.com
>> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
> André Huijts
> andre.huijts@upcmail.nl
>
>
>
>
>
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
André Huijts
andre.huijts@upcmail.nl
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Mon Feb 4 19:18:36 2013
This archive was generated by hypermail 2.1.8 : Tue Feb 05 2013 - 02:50:00 EST