Jose Luiz Martins wrote:
> Hi !
>
> Today I've decided to put my 9010A back to work after 5 years.
>
> It boots OK, but the display is not showing some parts of some
> letters. For instance the K and V looks like I.
>
> I opened and performed the display test, as mentioned on Workshop
> manual, and everything seams to be right.
>
> Any clue on that ?
>
> Thanks
>
> JL
> ___
Haven't done the display test in years - does it check every segment? If
so, and the segments all light up as they should then you may have a ROM
issue where some of the ASCII code text in the text tables is defective.
That is just a guess, you can check against the code on the ftp site to
make sure the base ROMs are all good.
Anyone else with a guess?
John :-#)#
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Sun Mar 3 13:34:02 2013
This archive was generated by hypermail 2.1.8 : Sun Mar 03 2013 - 14:50:00 EST