Had a chance to look at this a little bit more tonight. I am using Windows 7 x64, and doesn't appear to be working. I can't even get the script to compile.
I switched to a little netbook that I have and now the script is compiling and not giving any errors, but won't transfer the data to the fluke. The fluke just displays that it's receiving , but never changes. My netbook is recognizing the cable and matched the settings on both the computer and fluke to match.
Any ideas would be greatly appreciated.
________________________________
From: Theron Troxel <troxelone@yahoo.com>
To: Technical Tools Mail List <techtoolslist@flippers.com>
Sent: Monday, April 1, 2013 6:12 PM
Subject: Re: [Techtoolslist] Fluke 9010A Install with FIDE
The cord was initially com7, but changed it thinking it had to be com1 - com4 to match the FIDE setting.
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Mon Apr 1 23:29:22 2013
This archive was generated by hypermail 2.1.8 : Tue Apr 02 2013 - 01:50:00 EDT