Re: Fluke 9010A Install with FIDE

________________________________
 From: Theron Troxel <troxelone@yahoo.com>
To: "techtoolslist@flippers.com" <techtoolslist@flippers.com>
Sent: Monday, April 1, 2013 5:50 PM
Subject: [Techtoolslist] Fluke 9010A Install with FIDE
 
Trying to get my fluke to respond to my computer. I have a USB-to-RS232 cord, and my computer recognize the cord. I went to settings on my computer and set it to com1 and matched everything to the computer and fluke.

Wrote a simple program that just displays "test" and tried sending it through the Fluke FIDE software. The fluke never responds to when I send the program. I don't get any errors of any type on the fluke. However, on the Fluke FIDE I get the following error:

Starting process...
WARNING: Include file already exists. File may have been included
multiple times, or two files with the exact same file name may exist.
It is recommended that you give your files distictive file names.
C:\Program Files (x86)\Fluke FIDE\Scripts\test.9lc -> C:\Program Files (x86)\Fluke FIDE\Internal\test.9lc (exists).
ERROR: Could not create batch file C:\Program Files (x86)\Fluke FIDE\Internal\9lc.bat.
Permission denied
Batch
 file processing failed.
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Fri Apr 12 14:09:53 2013