Hi Jose,
it's a logic comparator, I guess you won it on Ebay some days ago.The 552
model you have is for CMOS testing while the 550 model is for TTL.I have
both of these.
The operation simply; put a good known IC in the ZIF socket, connect the
clip to the IC on the unit under test, press the TEST button.If the OK led
will light, then the IC is good otherwise some of the numbered LEDs will go
ON telilng you there is a problem on that PIN (usually outputs).Please, keep
in mind that this device is not perfect and it will give you false positive
when, for example, output of an IC is tied to GROUND or VCC or when you are
testing particular devices like flip-flop, counters, latches (you have to
CLEAR these before testing).Obviously, your comparator need to take POWER
and GROUND from the unit under test by connecting the RED and BLACK clips.
Later I will scan the manual of my B&K 552 and send it to you.
P.S.
Did you find your Fluke 68000 POD at the end?
----- Original Message -----
From: "Jose Luiz Martins" <joseluizmartins@gmail.com>
To: "Technical Tools Mail List" <Techtoolslist@flippers.com>
Sent: Saturday, June 08, 2013 3:40 AM
Subject: [Techtoolslist] BK IC Tester 552
> Hi!
>
> I fond one BK 552 IC Tester but I don't have it's manual.
>
> Can someone tell me how this tester works please?
>
>
> Thanks!
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Sat Jun 8 04:12:00 2013
This archive was generated by hypermail 2.1.8 : Sat Jun 08 2013 - 14:50:00 EDT