No problem!
I'll do that tomorrow morning. It's 1:25AM down here in Brazil.
Will be very interesting to see the deference.
My board has one H1 hand writed after the word Rev.
Thanks
JL
On Tue, Jul 9, 2013 at 1:22 AM, Jonathan Gevaryahu <jgevaryahu@gmail.com> wrote:
> Is there any chance you can dump the version 2C eproms you have in your
> 9010A? the only firmware i've seen around is 3A and I'm curious what fluke
> changed between 2C and 3A.
>
> Also, depending on what board revision you have the roms may be arranged a
> bit differently. I have the service manual around here somewhere, I can
> probably tell you where the 3A roms would go on your board.
>
> --
> Jonathan Gevaryahu
> jgevaryahu@gmail.com
> jgevaryahu@hotmail.com
>
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Tue Jul 9 00:28:36 2013
This archive was generated by hypermail 2.1.8 : Tue Jul 09 2013 - 15:50:00 EDT