Re: 6800 to 6502 pod combo ROM?

As I recall the Fluke code is the same for the 6800 and 6502 pods,
perhaps you just enable either the upper or lower half of the Eprom to
select which pod the system thinks you have?

Might be a project to make an adapter that converts back and forth...

John :-#)#

On 11/08/2013 10:49 AM, William Stillwell wrote:
> I am not sure there is a combo version?
>
> Here is the link to convert a 6800 to 6502
>
> http://forums.arcade-museum.com/showthread.php?t=217476
>
>
>
>
> -----Original Message-----
> From: techtoolslist-bounces@flippers.com
> [mailto:techtoolslist-bounces@flippers.com] On Behalf Of david grohowski
> Sent: Friday, November 08, 2013 11:18 AM
> To: jrr@flippers.com; techtoolslist@flippers.com
> Subject: [Techtoolslist] 6800 to 6502 pod combo ROM?
>
> Is this up for d/l anywhere?
>
>
> thx
>
>
> david grohowski
> electronicamuse@aol.com
> _______________________________________________
> Techtoolslist mailing list
> Techtoolslist@flippers.com
> http://seven.pairlist.net/mailman/listinfo/techtoolslist
> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>
>
>

-- 
How to subscribe or unsubscribe from TTL 
http://seven.pairlist.net/mailman/listinfo/techtoolslist
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/