I have one but haven't been able to get a solid picture out of it yet. Would love to know what settings your using.
David :-)=
-----Original Message-----
From: "James Marous" <jmarous@woh.rr.com>
Sent: 11/21/2013 2:28 PM
To: "techtoolslist@flippers.com" <techtoolslist@flippers.com>
Subject: [Techtoolslist] Sencore CM2125 Monitor Analyzer
I'm curious if anyone is using one of these on their test bench? I managed
to pick up a couple and have been playing around with them. I have some
specific questions on the CGA advanced timing settings, like horizontal and
vertical front and back porch timing settings. If anyone has one and has
played with these setting, I'd like to know what has worked best for you on
the old standard res monitors.
Thanks
James
-- James Marous mailto:jmarous@woh.rr.com _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/Received on Thu Nov 21 17:37:18 2013
This archive was generated by hypermail 2.1.8 : Thu Nov 21 2013 - 18:50:00 EST