On 12/11/2013 2:24 PM, Andrew Welburn wrote:
> long shot..
>
> But has anyone seen, or knows of a service disk suitable for the
> 9100FT ?
>
> I'm updating my 9100 page soon as i've been working on 5 of these
> systems, but while i can set the 9100FT to acknowledge 16mb ram in
> post, the system always reports just 4mb.. I can actually get it to
> test 32mb (when installed 8x4mb) but the post always fails, and the
> dip switch combination is not even valid as per what is screened on
> the pcb. I dont think they ever anticipated any crazy person putting
> in 32mb ram and just abandoned compatability :)
>
> the v1.4 service disk is the latest version i have, but it only allows
> you to set 1,2 or 4mb system ram...
>
I have units with at least 8MB in them. I believe I set them with the
6.0 service disk. I'll have to find my notes.
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Fri Dec 13 21:10:49 2013
This archive was generated by hypermail 2.1.8 : Sat Dec 14 2013 - 10:50:00 EST