Re: 9100FT

On 12/14/2013 10:42 AM, Andrew Welburn wrote:
> so i went back into the techtools FTP and found the v6 service disk
> (SERVICE60.TD0), but i get the following error message when i try it
> out on my 9100FT :
> http://www.andysarcade.net/pix/DSC_1711.JPG
>
> "Fluke 9100A Service Init Disk, v6.0
> This Board Has An Invalid Service ID"
>
> Does this mean it doesn't like the fact its a 9100FT (not 9100A), or
> does it mean the disk is serialised to a particular machine? (i
> thought by v6 they had done away with serialisation)
>
> now, there's another disk image on the FTP - 60SERV.dsk - but its in
> the SAMdisk format, and i dont have an internal floppy drive any more
> to build and test this one...
>
> could it be that these are two different types of v6 service disk? Can
> anyone remember which is which?
The 6.0 disk was originally serialized. I created a patch to remove the
serial check at one point, and I thought I uploaded the patched disk.
The 6.0 disk doesn't have the SCSI format tools so you still need the
V1.4 disk as well.

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Sat Dec 14 11:15:27 2013