Re: 9100FT

excellent news.. i'll try an update when i get some time.. i'm currently
in the process of packing up my life into a container for shipping!

Corey - i'd still love to get hold of the non-serialised service floppy
disk if you can release that?!

thanks!

Andrew Welburn
http://www.andys-arcade.com

On 20/02/2014 00:54, John Robertson wrote:
> Update on the 9100 and SCSI eliminators...spotted another variation on
> different mail list and bought it for testing. Cost all of $75 and
> postage...
>
> http://www.codesrc.com/src/scsi2sd/buy.php
>
> Then I bought a 4GB Kingston Micro SD ($12, can be cheaper of course)
> and programmed it with the code v6_1.rar that I got from:
>
> http://www.andys-arcade.com/personal/tech/fluke9100/index.htm (task 14)
>
> Following the procdure outlined (I use OSX and didn't want to install a
> Linux system) here:
>
> http://doc.freenas.org/index.php/Burning_an_IMG_File#Using_Keka_and_dd_on_an_OS_X_System
>
>
> Plugged it into my 9100FT and it booted up just fine!
>
> Andy, you may want to update your site.
>
> Note that Michaels SCSI2SD worked right out of the box. Do not add
> jumpers, etc.!
>
> John :-#)#
>
> On 12/20/2013 7:32 AM, Andrew Welburn wrote:
>> hey Corey..
>>
>> I've now tried the Samdisk version of the service disk fron the ttl
>> ftp site (60serv.dsk) and it still gives me the invalid service id..
>>
>> can you send me, or upload to the ftp site the patched disk image??
>> i'd very much appreciate it..
>>
>> Andrew Welburn
>> http://www.andys-arcade.com
>>
>> On 14/12/2013 16:15, Corey Stup wrote:
>>> On 12/14/2013 10:42 AM, Andrew Welburn wrote:
>>>> so i went back into the techtools FTP and found the v6 service disk
>>>> (SERVICE60.TD0), but i get the following error message when i try it
>>>> out on my 9100FT :
>>>> http://www.andysarcade.net/pix/DSC_1711.JPG
>>>>
>>>> "Fluke 9100A Service Init Disk, v6.0
>>>> This Board Has An Invalid Service ID"
>>>>
>>>> Does this mean it doesn't like the fact its a 9100FT (not 9100A), or
>>>> does it mean the disk is serialised to a particular machine? (i
>>>> thought by v6 they had done away with serialisation)
>>>>
>>>> now, there's another disk image on the FTP - 60SERV.dsk - but its in
>>>> the SAMdisk format, and i dont have an internal floppy drive any more
>>>> to build and test this one...
>>>>
>>>> could it be that these are two different types of v6 service disk? Can
>>>> anyone remember which is which?
>>> The 6.0 disk was originally serialized. I created a patch to remove the
>>> serial check at one point, and I thought I uploaded the patched disk.
>>> The 6.0 disk doesn't have the SCSI format tools so you still need the
>>> V1.4 disk as well.
>>>
>>>
>>> _______________________________________________
>>> Techtoolslist mailing list
>>> Techtoolslist@flippers.com
>>> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>>> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>>>
>> _______________________________________________
>> Techtoolslist mailing list
>> Techtoolslist@flippers.com
>> http://seven.pairlist.net/mailman/listinfo/techtoolslist
>> FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
>> Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
>>
>>
>
>
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Thu Feb 20 06:36:36 2014