At 01:58 PM 9/4/97 -0700, Al wrote:
>
>I just took a look at the schematic, and it would have been trivial to
>make it a tracking supply (eliminating one of the adjustment pots).
>
>I'll put a drawing up for that as well..
That is true. Either way works great. If you saw my PCB, however, you would
see that removing one pot would not make it any smaller. But it does make
it one component cheaper... :-)
-Anders
-----------------------------------------
| Anders Knudsen
| ASIC Design Engineer
| Adaptec, Inc., Boulder Technology Center
| anders_knudsen@btc.adaptec.com
| http://www.adaptec.com
=========================================
Received on Thu Sep 4 14:11:09 1997
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:32:56 EDT