Couldn't hurt. Are the catbox pcbs only single sided? No traces on the
component side?
A schematic would be cool. ;-)
+------------------------------------------+
| Anders Knudsen
| ASIC Design Engineer
| Adaptec, Inc., Boulder Technology Center
+------------------------------------------+
On Wed, 31 Dec 1997, John Robertson wrote:
> I have two of these CAT BOXES in the shop and can photocopy the solder
> side of them if that would help in the layout. I also have the interface
> boards for the connectors, and the docs on the checksum mod. Is this of
> use to this project?
>
> John :-#)#
>
>
> --
> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
> Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
> mailto:jrr_at_flippers.com, web page http://www.flippers.com
> "Old pinballers never die, they just flip out."
>
Received on Wed Dec 31 10:23:13 1997
This archive was generated by hypermail 2.1.8 : Thu Jul 31 2003 - 23:01:05 EDT