> This seems to be exactly backwards from the curve trace that I took
> of the device last summer. As you increase the voltage, the current
> increases (roughly) x^2 (from memory). Since the part is between the
> deflection out and ground, I would assume that it would DECREASE the
> voltage output exponentially with voltage.
>
That'd be right, wouldn't it? If you're deflecting too much near the
edges, you want to decrease the voltage output to bring it back into
linearity. (Or am I bass-ackwards?)
-Clay
Received on Mon Feb 2 17:11:30 1998
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:30:48 EDT