Re: Cinemenu results...(Zonn?)

On Thu, 26 Mar 1998 10:58:41 -0800, Clay Cowgill <ClayC@diamondmm.com> wrote:

>
>> Did you see the LED flickering on the motherboard, Clay? (Paul's
>> original program never turned the LED off, so that might be the case
>> this time...then it'd be pretty hard to spot the resetting.)
>>
>LED looked to be on solid... If it's software controllable, have the
>state toggle at the end of the draw routine. We'll see if it's
>completing or not...

As Paul will tell you, that's a bad thing. The LED is hooked up to the reset
circuitry. When the LED is on, the CPU is in a reset state.

It probably only looks solid, but instead is flickering at a very fast rate.
(If it were solid you should see nothing on the screen.)

-Zonn

<><><><><><><><><><><><><><><><><><><><><><><><><><><><

 ------ ___ Member of A.A.C.S.:
 |---- | ( ) Association for Artistically
    / / ( () ) Challenged Signatures
   / / //\\ // (__)
  / ---/ // \\ //\\ // zonn @ zonn . com
 -------| // \\/
Received on Thu Mar 26 11:36:00 1998