Matt Rossiter - Verio Southern California wrote:
> I always forget the model number so I just call it "tempest monitor". I
> think it's the WG 19k6100 or something like that.
>
> Anyway - I resurrected it from the dead and it will go into my Star Wars
> game (Once I get my dead Star Wars boards working). I have two
> questions -
>
> 1) I'm missing the top half of my screen - usually it's pretty
> easy to resolve this problem. Find the bad diode, transistor or solder
> joint. Well, every component seems to check out fine. So I'm wondering
> if there's a problem somewhere in the yoke. Seems unlikely - but possible
> I guess.
>
Not very likely (try impossible). Yoke is OK.
>
> 2) I've installed the LV2000 onto it. When I get to the test where I
> just plug in the deflection board (and nothing else) and adjust the pots -
> I'm OK on the positive side (+26v) but on the negative side I'm getting
> only -15v max. I should be getting about -33v at the black lead, but I'm
> only getting -24.
>
> Has anybody seen these problems?
>
> Matt
Received on Wed Mar 24 03:59:53 1999
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:31:54 EDT