All or nothing, huh? In that case the video isn't even getting
to the tube OR the power from the high voltage supply to
the neck board isn't there. Either way you don't have any
drive to the tube to tell it when to be on or off.
Thomas43@aol.com wrote:
> In a message dated 3/24/99 11:33:48 PM, rlboots@cedar-rapids.net writes:
>
> << Perhaps the high voltage is set WAY too high. By brightness pot
> do you mean an actual brightness pot or the G2 (screen) pot?
> >>
>
> Both, I'v done all the obvious, but it's too bright and the vectors are all
> connected. I've tried turning down the screen and playing with the brightness
> pot, but I can't get anything acceptable. It's either too dark or too bright,
> with nothing in between.....
Received on Thu Mar 25 14:14:04 1999
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:31:54 EDT