Re: G-80 AC Voltage to card cage

Hi Chris!

I don't recall the exact voltage, but this is strictly for a simple
interrupt I believe, it is isolated by a cap and so the 7VAC should be
fine, just avoid AC over, say 40V on this line...

John :-#)#

"Christopher X. Candreva" wrote:
>
> Trying to get my Star Trek running again . . .
>
> I just want to verify what the AC voltage supplied to the G-80 card cage
> should be. G-80 info document from spies says it should be 3v . Mine is
> reading about 7-8 VAC. All other voltages look right.
>
> Except, of course, nothing seems to be working -- no led on the CPU board,
> nothing.
>
> -Chris
>
> ==========================================================
> Chris Candreva -- chris@westnet.com -- (914) 967-7816
> WestNet Internet Services of Westchester
> http://www.westnet.com/

-- 
 John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9     
 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)  
 mailto:jrr_at_flippers.com, web page http://www.flippers.com      
        "Old pinballers never die, they just flip out."