> "So how are you using an SMT plate to desolder 24/40 pin devices? All at
> once?
> "
>
> It's not a plate, it's just a very fancy heat gun, with temperature and
> air pressure controls. Once you have the temp and pressure dialed in, and
> the leads straight, heat the part up and pull it out. The trick is making
> sure the leads don't have any bends to catch in the holes.
This doesn't scorch the PCB? Or are you just well practiced with the length
of time that you can expose a surface to "warmth of the sun" 8-) ?
Received on Thu Jun 10 15:17:54 1999
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:31:41 EDT