I think that Mark meant that the replacement kit did not come with
2N6259's, and he was unsure if the 2N3716's would sub...
Oh, and I am getting in a Electrohome G08 monitor test signal generator. I
am planning on building a few of these, is anyone interested?...cost? I
have no idea at this moment, but it would be over $50US and under $200US at
a guess.
John :-#)#
At 10:34 PM 10/19/1999 -0400, you wrote:
>"Mark A. Jenison" wrote:
>
> >
> > Do not use the 2N6259s...also, some caps are incorrect (as you have
> > found out).
> >
>
>Why do you say that Mark? The revision 3 monitor came with 2N6259s I just
>doubled check with the NOS G08 I have in the shop.
>
> >
> >
> > No other comments accept:
> >
> > www.enteract.com/~jenison/mars
> >
> > Contains an FAQ for the Electrohome G08 monitor...it has been helpful
> > to some people, but needs more contributions from the gurus...
>
>Yea, You did a great job starting that up... I plan on helping you make it as
>good as the WG FAQ write up
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
http://www.flippers.com
"Old pinballers never die, they just flip out."
Received on Wed Oct 20 00:10:35 1999
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:32:47 EDT