Re: New Monitor: #3 CIRCUIT FOR REVIEW

I thought that it was used for debugging purposes.. So you could work on a deflection board w/o the yoke plugged in.. Although I could certainly be
wrong :)

Jon

At 09:02 AM 11/09/1999 -0500, you wrote:
>I put in an open resistor "R2" in my design. It's not clear what the
>purpose of that resistor was in the WG design, but they used a 1.2K resistor
>there. Was it some kind of noise limiter or spike reducer? or was the
>feedback somehow pertinent?
>
>James
>
>
>----- Original Message -----

From: James Nelson <nelsonjjjj@didactics.com>
>To: <vectorlist@lists.cc.utexas.edu>
>Sent: Tuesday, November 09, 1999 12:39 AM
>Subject: New Monitor: #3 CIRCUIT FOR REVIEW
>
>
>> Check it out very carefully please. I changed out the sense resistor, but
>> the value may be too low?
>>
>>
>http://www.angelfire.com/nh/northamericantelecom/images/deflectionamp03.gif
>>
>>
>> Design comments, complaints, beatings, threats, and criticisms, as usual,
>> are requested. :-)
>>
>> Thanks everyone,
>> James
>>
>>
>>
>> http://www.angelfire.com/nh/northamericantelecom
>> low cost regular phone service click links to 6.9c or 5.9c no monthly
>fees!
>>
>>
>>
>
>
Received on Tue Nov 9 10:10:32 1999