On Sat, 20 Nov 1999, Noel Johnson wrote:
> Where can I find a good article on adjusting the convergence? I had to
> transfer the yoke and neck magnets from a broken tube to a good one.
> Convergence seems good, but I am not sure it's as good as it could be.
The Monitor Manual will have the procedures for setting purity,
static convergence, and dynamic convergence.
If the dynamic convergence is off and you can live with it,
leave it alone. Setting dynamic convergence is by no means an exact
science (it involves tilting the yoke and adding those metal strips.)
Joe
------------------------------------------------------------------
Joseph J. Welser jwelser@ccwf.cc.utexas.edu
Design Engineer -- Crystal Semiconductor Corporation
Ph.D. Student in E.E. -- University of Texas at Austin
Work: jwelser_at_crystal.cirrus.com http://www.crystal.com
P.O. Box 17847; Austin, TX 78760
------------------------------------------------------------------
Received on Sat Nov 20 01:48:17 1999
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:32:29 EDT