That is correct. Twist the smaller connector.
Jeff
On Fri, 3 Dec 1999, Josh McCormick wrote:
> > I think you will find that the LF347N on the adaptor board is your
> > problem..
>
> Here's the response I got. Well, they're nice about it. But twisting one
> of the connectors? The small connector is obviously on correctly because
> I'm seeing vectors. It may be possible to twist the large one, but
> (especially) considering the presence of +/-22VDC, I don't think I want to
> try this without an outside opinion. Sound bogus to everyone else?
>
> Message follows:
>
> I don't know how there can be so many problems. My husband was sitting in
> the garage playing this board on a Tempest rig just prior to shipping it
> to you. Do you have the capacity to burn your own eproms? If not, I can
> send you a replacement eprom. As for the converter board. Are you sure
> you are hooking it up correctly to the Tempest harness? I believe that
> you are supposed to "twist" or "reverse" one of the connectors to make it
> hook up right. I can replace the converter board if it still doesn't
> work. Or, I can provide you with the components needed to facilitate the
> repair of the board. As you know, per auction terms, I provide no
> warranty. Because you are a repeat customer and you are very pleasant to
> deal with, I am willing to bend the rules and keep you happy. Let me know
> what you would like for me to do to remedy this situation.
>
>
Received on Fri Dec 3 15:17:14 1999
This archive was generated by hypermail 2.1.8 : Thu Jul 31 2003 - 23:01:10 EDT