Re: Asteroids Deluxe with WG19V2000 problems

For a little while, the game looked OK (no dot)... but the screen was
blooming alot. I put the cap kit in again and same as before.

Jeez, this thing is going to kill me!

----- Original Message -----
From: Josh Wirth <jwirth@gru.net>
To: <vectorlist@lists.cc.utexas.edu>
Sent: Monday, December 13, 1999 8:48 PM
Subject: Re: Asteroids Deluxe with WG19V2000 problems

> Is that part of the HV unit? The regulator board at the bottom of the
> cabinet? Where would I check it?
> Thanks,
> Josh
> ----- Original Message -----
> From: John Robertson <jrr@flippers.com>
> To: <vectorlist@lists.cc.utexas.edu>
> Sent: Monday, December 13, 1999 8:22 PM
> Subject: Re: Asteroids Deluxe with WG19V2000 problems
>
>
> > Have you checked the -15VDC supply?
> >
> > John :-#)#
> >
> > At 07:13 PM 12/13/1999 -0500, you wrote:
> > >OK anyone who is still interested.... I hooked up an oscilloscope to
the
> > >Z-out of the main board and it looks as though the signal only bounces
> from
> > >0 to about 2.2 Volts... so I am going to assume that this means the
main
> > >PCB is not signaling correctly... any clues on what to check first?
> > >
> > >Thanks for letting me waste your time,
> > > Josh
> >
> >
> > John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
> > Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
> > http://www.flippers.com
> > "Old pinballers never die, they just flip out."
> >
>
Received on Mon Dec 13 20:39:33 1999