Re: WG6100 Deflection Transistor Connectors

I seriously doubt it would be .1" spacing, those aren't made for handling power. I think they are .156" (like what's used on Bally pinball for the solenoid driver board). And the trifurcon contacts would be a good idea too. They connect to 3 sides of the
pin instead of only 1.

Jon Raiford wrote:

> Sorry for the dumb question, but can someone tell me which inline molex connectors I need to buy for hooking up deflection transistors to a WG6100? I'd hate to order the wrong thing since I don't know molex spacings and sizes very well. By looking ove
>
> r Bob's site, I'm guessing I need a 7 or 8 position housing with a .100 center (whatever that means). I also assume I can get a 10 position one and cut it down to the length I need.
>
> Jon
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

--
Windows:
32 bit graphical interface for a
16 bit patch for an
8 bit operating system written for a
4 bit processor by a
2 bit company that can't stand
1 bit of competition.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.