On Mon, 6 Mar 2000 08:05:50 -0600 , you wrote:
>> Now, I would _swear_ that when I took this apart, the three black
>> wires with the spade lugs on them (one coming from each of the three
>> boards) were in fact bolted down to the chassis, along with the two
>> grey wires from the picture tube and neck-board assembly. I would
>> have _thought_ this would be considered "chassis ground"...
>And make sure that they ARE connected to the chassis.
>Simply connecting them all together (for example, at the top of a PCB
>standoff) won't do, as I found out when I first for my SW. That caused
>it to display some weird jaggies.
So all five of those ground wires _do_ go straight to the chassis,
then. :) Great - just figured I'd better double-check on that point before
plugging the beast back in...
-----------------------------------------------------------------------------
BREAK UP MICROSOFT!!
(Preferably with a wrecking ball and some dynamite.)
---------------------------------------------------------------------
solarfox@DON'TMESSWITHtexas.net (Gary Akins jr.)
http://lonestar.texas.net/~solarfox
---------------------------------------------------------------------
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Mar 6 19:56:08 2000
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:31:57 EDT