Re: T-Molding

From: Walt <wfeeger_at_amengtest.com>
Date: Wed Mar 15 2000 - 14:10:52 EST

Joel:

I have bought t-molding from Steven Gregory (www.arcadeshop.com) and it has
fit several of my Atari cabinets perfectly. You can also check
http://www.t-molding.com

Hope that helps!

Walt

----- Original Message -----
From: Joel Rosenzweig <Joel_Rosenzweig@Agilent.com>
To: <vectorlist@synthcom.com>
Sent: Wednesday, March 15, 2000 12:19 PM
Subject: VECTOR: T-Molding

> I'm trying to replace the T-molding on my Star Wars. A while back, I
> purchased 3/4" T-molding from Happ Controls thinking that this was the
right
> size for my machine because Star Wars and basically every cabinet I own is
> nominally 3/4". When I placed a piece of this T-molding onto the game, I
> noticed that the replacement molding is not as wide as the cabinet is and
it
> leaves a visible uncovered region of cabinet edge.
>
> I used a digital caliper to measure the cabinet, the old molding and the
new
> molding. Here's what I found. The cabinet measures 0.770 inches wide.
The
> original molding was 0.760 inches wide, and the new molding was 0.750
inches
> wide. It's a *small* difference, but its quite visible.
>
> Has anyone noticed this problem? Where do I buy the right stuff? And
what
> is it called? My other Atari cabinets measure the same width as my Star
> Wars.
>
> I have some mounting hardware that I also need to replace. I hope I don't
> find that Atari made up their own threading standard too. :-)
>
> Thanks,
> Joel-
>
>
>
>
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Wed Mar 15 15:37:39 2000

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:31:58 EDT