-- On Mon, 10 Apr 2000 08:01:06 Walt wrote: >Update on my Monitor -- I got it working!! > >Turns out you were right Jon, I should have been more careful with Bob >Robert's unsupported upgrade kit. Turns out the transistors included in the >kit for Q607/Q704 were the wrong type and were causing all the blown diodes >and fuses. Are you sure you don't mean Q604, not Q607? I don't believe there is a Q607 on the deflection board. Q604 and Q704 are two of the four transistors with heatsinks on the deflection board. Gregg Woodcock's article recommends upgrading these from the original MPSU07 (or NTE188) to the beefier NTE49. I have done this a half dozen times on P314 and P327 revision boards with no ill affects. Would you mind if I asked what part that Bob substituted for these? Thanks, Noel Johnson --== Sent via Deja.com http://www.deja.com/ ==-- Share what you know. Learn what you don't. --------------------------------------------------------------------------- ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the ** message body to vectorlist-request@synthcom.com. Please direct other ** questions, comments, or problems to neil@synthcom.com.Received on Mon Apr 10 14:50:35 2000
This archive was generated by hypermail 2.1.8 : Thu Jul 31 2003 - 23:00:48 EDT