Re: Traces and repair...

Here's a URL:

http://www.chemtronics.com/catalog/catalog.cgi?action=list_products&category=7#20140

SPW
kanata, on
canada

Paul_Labuda@dell.com wrote:

> I have a conductive paint pen that I picked up at Radio Shack that does a
> great job fixing traces. Here's the pertinent information from the pen:
>
> CW2200 - STP
> Circuit Works (tm) conductive pen
>
> Circuit Works
> A division of Chemtronics
> 8125 Cobb Center Drive
> Kennesaw, GA 30152
>
> Since it's a Chemtronics product, you can probably find it outside of Radio
> Shack, too.
>
> - Paul Labuda
>
> -----Original Message-----
> From: Dave George [mailto:lebeau@u.washington.edu]
> Sent: Friday, May 05, 2000 10:51 AM
> To: vectorlist@synthcom.com
> Subject: Re: VECTOR: Traces and repair...
>
> On Fri, 5 May 2000, John Robertson wrote:
>
> >You can get a neat product from electronics hobby stores that PAINTS a
> >conductive trace right on the board! I use it for restoring edge connector
> >pads on a number of game boards. For traces jumper wires are best if
> >corroded to the point where you are not sure of it's remaining life.
> >
> >Should I sell this pen? Do people have trouble finding it?
> >
> >John :-#)#
>
> John, can you give me a product name when you get the chance. I
> haven't looked for such a thing yet, but I hadn't neede it yet
> either. =) It sounds perfect for what I need.
>
> >> So, how do I take care of this, or is this one lost? I'm willing to
> >>do whatever I may need to, as long as I know what that might be. =)
> >>
> >> Remy LeBeau
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

--
Simon  P. Whittam
Senior Design Engineer
Cadence Design Systems (Canada) Ltd.
1130 Morrison Drive, Suite 240
Ottawa, Ontario K2H 9N6
Email:    simonw@cadence.com
Phone:    613-726-2717
Fax:      613-828-0528
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.