How is the tube "not working"? You might be wise to see if anyone you know
has a tube rejuvenator. I've brought a few tubes back from the dead with
ours. They show up on eBay every now and then sell around $50 or so...
Some faults in tubes are not fatal, sometimes the tube can be saved if
shorted by running a separate filament transformer.
John :-#)#
At 10:50 PM 8/9/00, Steven Winslow wrote:
>Gents,
>
>I've got an Amplifone tube in the garage that was sold to me in a bulk deal
>by a friend as "untested." They obtained it from an old operator. It is now
>tested to be NOT WORKING. I tested it in a good working Star Wars. It has
>the typical burns in the center of the tube. I almost trashed it but then
>remembered some discussions a while back about parts on it that some of you
>may want. The yoke, shunts and nipple on the end of the neck seem to be in
>good shape and may be of some value.
>
>I could use a tested - good Amplifone deflection board for my on-going
>vector projects. I could also use a tested - good Asteroids Deluxe board.
>
>Understandably these boards are worth more than a NFG tube so payment would
>also be a part of the deal. If there is any interest please LMK directly
>at winslow@earthlink.net
>If no interest then I guess I'll put it up on EGAY because I need to clear
>the space in the garage for more cabinets !!! :-)
>
>Thanks for your consideration.
>
>Steve
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
http://www.flippers.com
"Old pinballers never die, they just flip out."
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Thu Aug 10 14:47:09 2000
This archive was generated by hypermail 2.1.8 : Thu Jul 31 2003 - 23:01:02 EDT