Re: FT: Amplifone Tube - NON WORKING

I recommend B&K.

someotherguy wrote:

> John, there seem to be quite a few rejuvenators on eBay. I've been
> watching them for a while, and have been wondering which ones would be good
> candidates for use with classic arcade monitors. There's plenty of B&K and
> Sencore units, could you (or another list member) recommend certain models
> for use with classic vector and raster monitors? Thanks...
>
> Richard
> http://people.atl.mediaone.net/someotherguy
>
> At 11:35 AM 8/10/00 -0700, you wrote:
> >How is the tube "not working"? You might be wise to see if anyone you know
> >has a tube rejuvenator. I've brought a few tubes back from the dead with
> >ours. They show up on eBay every now and then sell around $50 or so...
> >Some faults in tubes are not fatal, sometimes the tube can be saved if
> >shorted by running a separate filament transformer.
> >
> >John :-#)#
> >
> >At 10:50 PM 8/9/00, Steven Winslow wrote:
> >>Gents,
> >>
> >>I've got an Amplifone tube in the garage that was sold to me in a bulk deal
> >>by a friend as "untested." They obtained it from an old operator. It is now
> >>tested to be NOT WORKING. I tested it in a good working Star Wars. It has
> >>the typical burns in the center of the tube. I almost trashed it but then
> >>remembered some discussions a while back about parts on it that some of you
> >>may want. The yoke, shunts and nipple on the end of the neck seem to be in
> >>good shape and may be of some value.
> >>
> >>I could use a tested - good Amplifone deflection board for my on-going
> >>vector projects. I could also use a tested - good Asteroids Deluxe board.
> >>
> >>Understandably these boards are worth more than a NFG tube so payment would
> >>also be a part of the deal. If there is any interest please LMK directly
> >>at winslow@earthlink.net
> >>If no interest then I guess I'll put it up on EGAY because I need to clear
> >>the space in the garage for more cabinets !!! :-)
> >>
> >>Thanks for your consideration.
> >>
> >>Steve
> >>
> >>---------------------------------------------------------------------------
> >>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> >>** message body to vectorlist-request@synthcom.com. Please direct other
> >>** questions, comments, or problems to neil@synthcom.com.
> >
> >
> > John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
> > Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
> > http://www.flippers.com
> > "Old pinballers never die, they just flip out."
> >
> >---------------------------------------------------------------------------
> >** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> >** message body to vectorlist-request@synthcom.com. Please direct other
> >** questions, comments, or problems to neil@synthcom.com.
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

--
Windows:
32 bit graphical interface for a
16 bit patch for an
8 bit operating system written for a
4 bit processor by a
2 bit company that can't stand
1 bit of competition.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.