Re: FT: Amplifone Tube - NON WORKING

Wow ! I've started a trading frenzy on vectorlist. My apologies. Thanks
for all the responses. I've e-mailed the first interested party (based on
the times of the mail) and will await their confirmation of the deal. Any
further questions should be directed to me at my email address ---->
winslow@earthlink.net !!!

The tube does not display a picture when hooked up to a good working
system. I have not attempted to rejuvenate it.

The reason I would like to trade for a good working deflection board is
because the one (spare) deflection board I have will not display a picture.
 Scott ! What do you suggest for a repair procedure ?

Thank you everyone for the fabulous advice. I've learned a lot while
lurking on vectorlist & rasterlist over the last year or so. The Amplifone
HV FAQ, Tempest Theory of operation docs & mods, Clays multikits, MK, Greg,
Anders for the killer LV2000 modification and others have been invaluable !
 My collection thanks every one of you !

I'm officially out of the closet now and will try not to be just a lurker.
Please bear with me.

Regards,

Steven Winslow

for the immense respondantsAt 10:50 PM 8/9/00 -0700, you wrote:
>Gents,
>
>I've got an Amplifone tube in the garage that was sold to me in a bulk deal
>by a friend as "untested." They obtained it from an old operator. It is now
>tested to be NOT WORKING. I tested it in a good working Star Wars. It has
>the typical burns in the center of the tube. I almost trashed it but then
>remembered some discussions a while back about parts on it that some of you
>may want. The yoke, shunts and nipple on the end of the neck seem to be in
>good shape and may be of some value.
>
>I could use a tested - good Amplifone deflection board for my on-going
>vector projects. I could also use a tested - good Asteroids Deluxe board.
>
>Understandably these boards are worth more than a NFG tube so payment would
>also be a part of the deal. If there is any interest please LMK directly
>at winslow@earthlink.net
>If no interest then I guess I'll put it up on EGAY because I need to clear
>the space in the garage for more cabinets !!! :-)
>
>Thanks for your consideration.
>
>Steve
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.
>
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Fri Aug 11 14:41:03 2000