Re: MORE: AD Deflection Amp Qs

I believe the V2000 monitor was only available as a 19" monitor, so it may be difficult to find a 15V2000 manual. There is a 19V2000 manual available on spies (http://www.spies.com/arcade).

Jon

At 01:16 PM 9/5/2000 -0600, you wrote:
>Ok, I'm making a little progress on this one... I've found out that my
>deflection board is a WG V2000 (thanks Chris), however the HV unit is
>definitely Electrohome (no wonder I was confused).
>
>I have not powered the game up yet (other things need maintenance as well),
>however, now I'm wondering about the compatibility between the WG and
>Electrohome components: are they interchangeable?
>
>Finally, anyone know where I can pick up a WG 15/19V2000 monitor manual? If
>not, how about a link to a PDF somewhere?
>
> > -----Original Message-----
> > From: owner-vectorlist@synthcom.com
> > [mailto:owner-vectorlist@synthcom.com]On Behalf Of Bret Pehrson
> > Sent: Monday, September 4, 2000 8:17 PM
> > To: Vector
> > Subject: VECTOR: AD Deflection Amp Qs
> >
> >
> > I'm in the process of bringing my Asteroids Deluxe CT out of
> > retirement, and
> > have some monitor board issues to work through.
> >
> > First off, I noticed that on this amp board, there is a cement resistor in
> > position R100, where on my UR there is no such beast (position
> > yes, resistor
> > no). Most of the markings have worn off, but it looks like it is
> > 3.? ohms,
> > testing (in circuit) reads ~5.4 ohms. I can't find a reference to either
> > R100 or R101 in either of my G05 manuals (issue 1 and 2), and was
> > wondering
> > if anyone knows anything about R100 and its purpose in life.
> >
> > Thanks
> >
> > ---
> > Bret Pehrson
> > mailto:bret@infowest.com
> >
> > ------------------------------------------------------------------
> > ---------
> > ** To UNSUBSCRIBE from vectorlist, send a message with
> > "UNSUBSCRIBE" in the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
> >
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Tue Sep 5 15:40:25 2000