Repairs I've seen use a small dab of glue from a glue gun.
Chris Loggans <chris.loggans@deltasolutions.com> on 09/26/2000 01:29:41 PM
Please respond to vectorlist@synthcom.com
To: "'vectorlist@synthcom.com'"
<vectorlist@synthcom.com>
cc: (bcc: Paul Tonizzo/SYBASE)
Subject: VECTOR: Gluing trace repair wires
I have a couple Asteroids boards that need trace repair work done to them.
(As a result of some previous hacking done by a prior owner.) One board I
am working with in particular needs a repair that would require 3-4" of wire
to connect the end points. I am concerned that a length of wire that long
might be easily damaged or pulled away from the board if it wasn't handled
properly. Some of the boards that come from the factory with jumper wires
seem to have a small bead of glue to keep them attached to the board. Does
anyone know what this glue is or have a recommendation of what to use that
would adhere to the PCB?
Thanks,
-Chris
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Tue Sep 26 14:00:35 2000
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:33:06 EDT