RE: MH Repro roller project

I am still interested in this project as well. I would be interested in the
whole thing (roller, assembly and all).

A>

P.S. I think the Trollian Web roller was black opaque.

-----Original Message-----
From: tom mcclintock [mailto:tomm@mgcap.com]
Sent: December 21, 2000 14:08
To: vectorlist@synthcom.com
Subject: Re: VECTOR: MH Repro roller project

They are still "in production". I think Mark's been pre-occupied with
old and new projects.

The original roller stock was green translucent, and could therefore be
backlit. The only comparable roller stock found to date is green
oil-impregnated cast nylon which is opaque. It is rather nice though...
:)

tom

Bret Pehrson wrote:
>
> Does anyone know what happened to this project? I tried contacting Mark
via
> e-mail a while back and got no response.
>
> I'm basically after a spare roller, not the entire assembly.
>
> Thanks
>
> > -----Original Message-----
> > From: owner-vectorlist@synthcom.com
> > [mailto:owner-vectorlist@synthcom.com]On Behalf Of Mark E Davidson
> > Sent: Friday, September 1, 2000 3:59 PM
> > To: vectorlist@synthcom.com
> > Subject: VECTOR: MH Repro roller project
> >
> >
> > Here is a quick update on the Major Havoc repro roller project. Right
> > before my sons surgery, I found enough time to finish the machining work
> > on all the repro rollers, Whets left is to install the encoder PC boards
> > and encoder wheels and test them all (where did I put those boards?). At
> > that point Ill come up with a clever way to distribute them to the
> > masses. Figure mid September to wrap this up as Im in the middle of a
> > big automation side job that will be done this week. after that Ill be
> > in San Jose doing the installation. After its all said and done im free
> > to play on these side projects and can get this whole first run behind
> > me.
> >
> > -=Mark=-
> >
> >
> > ------------------------------------------------------------------
> > ---------
> > ** To UNSUBSCRIBE from vectorlist, send a message with
> > "UNSUBSCRIBE" in the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
> >
>
>
---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Thu Dec 21 13:54:08 2000