Re: MH CP on eBay

Well, after your response, some input from David Fish and checking the
angles on my Tempest CP again I think it is a Tempest CP with a roller
hacked in.

It's not a haced CC CP because there is no hole for the TB. Also, as David
pointed out, there are 2 extra bolts next to the roller. These are probably
from the original Tempest spinner.

-roy-

----- Original Message -----
From: "tom mcclintock" <tomm@mgcap.com>
To: <vectorlist@synthcom.com>
Sent: Tuesday, February 06, 2001 9:19 AM
Subject: Re: VECTOR: MH CP on eBay

> It looks like a home-made conversion job. The prototypes had black
> rollers, and the overlay does not look like the ones on the prototypes
> (either jess' or scott's). Probably a Tempest or Space Duel conversion
> overlay hacked into a CC control panel with a roller from an original
> game...
>
> You can see both prototypes on my CE page:
> http://10.10.20.104/ce/alphaone.jpg
>
>
> tm
>
>
> tm
>
> chumblespuzz wrote:
> >
> > Hi All,
> >
> > This is not my auction. I hope it's not inappropriate to post this here.
> >
> > Check this out:
> > http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=556108179
> >
> > Clearly this is not for a dedicated. My best guess is that it is a
Crystal
> > Castles control panel. Aside from the early prototypes, was there ever a
> > conversion kit for Crystal Castles?
> >
> > -roy-
> >
>
> --------------------------------------------------------------------------
-
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Tue Feb 6 10:13:50 2001